All-optical switching using nonlinear subwavelength Mach-Zehnder on silicon

We report on the experimental demonstration of ultrafast all-optical switching and wavelength down-conversion based on a novel nonlinear Mach-Zehnder interferometer with subwavelength grating and wire waveguides. Unlike other periodic waveguides such as line-defects in a 2D photonic crystal lattice, a subwavelength grating waveguide confines the light as a conventional index-guided structure and does not exhibit optically resonant behaviour. Since the device had no dedicated port to input optical signal to control switching a new approach was also implemented for all-optical switching control

High performance and small footprint spot size converters based on SWG metamaterial lenses

Spot size converters with high expansion ratio are required in a variety of situations. This is the case of non-focusing Silicon on Insulator (SOI) fiber-to-chip grating couplers, which typically require long adiabatic tapers (Ltaper >100μm) from the narrow single-mode waveguides (WSi-wire ~ 500nm) to the wide grating region (Wgrating ~ 15μm). Here, we explore the potential of subwavelength grating (SWG) dielectric metamaterials to implement integrated GRaded INdex (GRIN) lenses to expand the mode field. Our designs achieve the desired Beam Expansion (BE) with insertion losses below 1dB over a distance of only LBE ~ 17μm.Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (cofinanciado FEDER), (TEC2016-80718-R); Universidad de Málaga. Ministerio de Educación, Cultura y Deporte (MECD) (FPU16/06121); Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Diffractive sidewall grating coupler: towards 2D free-space optics on chip.

Silicon photonics has been the subject of intense research efforts. In order to implement complex integrated silicon photonic devices and systems, a wide range of robust building blocks is needed. Waveguide couplers are fundamental devices in integrated optics, enabling different functionalities such as power dividers, spot-size converters, coherent hybrids and fiber-chip coupling interfaces, to name a few. In this work we propose a new type of nanophotonic coupler based on sidewall grating (SIGRA) concept. SIGRAs have been used in the Bragg regime, for filtering applications, as well as in the sub-wavelength regime in multimode interference (MMI) couplers. However, the use of SIGRAs in the radiation regime has been very limited. Specifically, a coarse wavelength division multiplexer was proposed and experimentally validated. In this work we study the use of SIGRAs in the diffractive regime as a mean to couple the light between a silicon wire waveguide mode and a continuum of slab waveguide modes. We also propose an original technique for designing SIGRA based couplers, enabling the synthesis of arbitrary radiation field profile by Floquet- Bloch analysis of individual diffracting elements while substantially alleviating computational load. Results are further validated by 3D FDTD simulations which confirm that the radiated field profile closely matches the target design field.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Multiaperture planar waveguide spectrometer formed by arrayed Mach-Zehnder interferometers

Concept, theory and simulations of a new type of waveguide device, a multiaperture Fourier-transform planar waveguide spectrometer, are presented. The spectrometer is formed by an array of Mach-Zehnder interferometers generating a wavelength dependent spatial fringe pattern at the array output. The input light spectrum is calculated using a discrete Fourier transformation of the output spatial fringes. The multiaperture input significantly increases the optical throughput (étendue) compared to conventional single input spectrometers. Design rules for the arrayed spectrometer are deduced from performance specifications such as wavelength range and spectral resolution. A design example with spectral resolution 0.025 nm and range 2.5 nm is presented, where the optical throughput is increased by a factor of 200 compared to a single input device

Designing anisotropy with waveguide subwavelength structures

Silicon sub-wavelength structures have become a versatile design tool for practical, high-performance integrated optical devices, ranging from highly efficient grating couplers to ultra-broadband beam-splitters. Recently, some of the basic anisotropic properties of these structures have been proposed for advance device design. Here we explore these properties in detail, from the underlying physics to emerging applications in on-chip polarization management.Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (cofinanciado FEDER), Proyectos TEC2016-80718-R, TEC2015-71127-C2-1-R (FPI scholarship BES-2016-077798), and IJCI-2016-30484, the Community of Madrid (S2013/MIT-2790), the Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech, the EMPIR program (JRP-i22 14IND13 Photind), co-financed by the participating countries and the European Union’s 2020 research and innovation program, and the Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant No. 734331

Designing polarization management devices by tilting subwavelength grating structures

Subwavelength gratings (SWG) are periodic structures which behave as controllable homogeneous metamaterials. SWGs are extremely interesting when they are used in platforms with a limited choice of material refractive indices, enabling the design of a myriad of high-performance devices. Here we present a novel technique to gain control over the intrinsic anisotropy of the synthesized metamaterial. We show that tilting the silicon segments in a SWG structure mainly affects the in-plane (TE) modes, with little impact on the out-of-plane (TM) modes. Moreover, we present a methodology to quickly but accurately calculate the modes of a tilted periodic structure modeling the structure as a rotated uniaxial crystal which can be solved with an anisotropic mode solver. Measurements on a set of fabricated tilted SWG waveguides validate our simulation results. By using the presented technique, we design a polarization beam splitter based on a 2x2 multimode interferometer. The design is based on the optimization of the tilting angle to tone the beat length of the TE modes to be a half of the beat length of the TM modes.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech; Ministerio de Economía y Competitividad (MINECO) (IJCI-2016-30484, TEC2015-71127-C2-R, TEC2016-80718-R); Ministerio de Educación, Cultura y Deporte (MECD) (FPU16/06762); European Regional Development Fund (ERDF); Comunidad de Madrid (SINFOTON-CM S2013/MIT-2790); European Association of National Metrology Institutes (EURAMET) (H2020-MSCA-RISE-2015:SENSIBLE, JRP-i22 14IND13 Photind)

Tilted subwavelength gratings: controlling anisotropy in metamaterial nanophotonic waveguides

Subwavelength grating (SWG) structures are an essential tool in silicon photonics, enabling the synthesis of metamaterials with a controllable refractive index. Here we propose, for the first time to the best of our knowledge, tilting the grating elements to gain control over the anisotropy of the metamaterial. Rigorous finite difference time domain simulations demonstrate that a 45° tilt results in an effective index variation on the fundamental TE mode of 0.23 refractive index units, whereas the change in the TM mode is 20 times smaller. Our simulation predictions are corroborated by experimental results. We furthermore propose an accurate theoretical model for designing tilted SWG structures based on rotated uniaxial crystals that is functional over a wide wavelength range and for both the fundamental and higher order modes. The proposed control over anisotropy opens promising venues in polarization management devices and transformation optics in silicon photonics.Universidad de Málaga (UMA); Ministerio de Economía y Competitividad (MINECO) (IJCI-2016-30484, TEC2015-71127-C2-R, TEC2016-80718-R); Ministerio de Educación, Cultura y Deporte (MECD) (FPU16/06762); European Regional Development Fund (ERDF); Comunidad de Madrid (SINFOTON-CM S2013/MIT-2790); European Association of National Metrology Institutes (EURAMET) (H2020-MSCA-RISE-2015:SENSIBLE, JRP-i22 14IND13 Photind)

A general approach for robust integrated polarization rotators

Integrated polarization rotators suffer from very high sensitivity to fabrication errors. A polarization rotator scheme that substantially increases fabrication tolerances is proposed. In the proposed scheme, two tunable polarization phase shifters are used to connect three rotator waveguide sections. By means of properly setting the polarization phase shifters, fabrication errors are compensated and perfect polarization rotation is achieved. Analytical conditions are shown that determine the maximum deviation that can be corrected with the proposed scheme. A design example is discussed, where the thermo-optic effect is used to provide the required tunable polarization phase shifting. Calculated 40dB extinction ratio is shown in presence of fabrication errors that would yield a 4dB extinction ratio in the conventional approach. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.The authors want to aknowledge Universidad de Málaga alaga, Campus de Excelencia Internacional Andalucia Tech for their support

Colorless devices and reception techniques for polarization multiplexed communications

Future optical networks call for flexible, high performance and low cost coherent optical receivers. We present here several advances towards such receivers, including integrated optical couplers with ultra-broad bandwidth, as well as novel reception techniques and architectures that will enable high performance coherent reception without filtering and polarization splitting elements.Universidad de Málaga - Campus de Excelencia Internacional Andalucía Tech. Spanish Ministry of Science under project TEC2013-46917-C2-1-